Grizzly Cordless Sander g5344 User Manual

MODEL G5344  
AIR PALM SANDER  
INSTRUCTION SHEET  
Assembly and Attaching Abrasives  
To assemble the sander and attach sandpa-  
per:  
EYE INJURY HAZARD!  
Always wear safety glasses  
when using this tool to  
prevent serious personal  
injury.  
1. Thread the air hose into the sander.  
2. Install a 14" NPT male quick-disconnect fitting  
(not included) into the end of the hose.  
INJURY HAZARD!  
Always disconnect tool from  
air to prevent unexpected  
operation during service.  
3. Lift one clamp up over the bracket (Figure 2),  
then pull the clamp down to open it.  
Bracket  
DUST HAZARD!  
Alwayswearrespiratorwhen  
using this tool.  
Introduction  
This 15,000 RPM air sander requires 75 PSI and  
3" x 41/2" sanding sheets. (You can cut a standard  
9" x 11" sanding sheet into sixths and trim each  
piece to size.) Air hose inlet is 1/4" NPT.  
Figure 2. Opening clamp.  
4. Insert one end of the sandpaper between the  
clamp and base as shown in Figure 3, and  
lift the clamp up and back over the bracket to  
secure the sandpaper.  
Inventory  
A. Air Palm Sander......................................... 1  
B. Air Hose...................................................... 1  
B
A
Figure 1. Model G5344.  
Figure 3. Attaching and securing sanding sheet.  
COPYRIGHT © MAY, 2006 BY GRIZZLY INDUSTRIAL, INC.  
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE  
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.  
#BL8253 PRINTED IN TAIWAN  
 
G5344 Parts Breakdown and List  
 
��  
��  
�  
 
 
 
 
 
�  
�  
 
 
�  
�  
�  
�  
�  
�  
��  
REF PART #  
DESCRIPTION  
REF PART #  
DESCRIPTION  
1
PS07M  
PHLP HD SCR M4-.7 X 8  
LOCK WASHER 4MM  
HOUSING COVER  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
P5344014  
P5344015  
P5344016  
P5344017  
P5344018  
PFH49M  
CYLINDER  
2
PLW02M  
P5344003  
P5344004  
P5344005  
P5344006  
P5344007  
P5344008  
P5344009  
P5344010  
P5344011  
PS38M  
STEEL BALL  
3
CLAMP SPRING  
4
RUBBER SUPPORT ASSEMBLY  
TUBE ASSEMBLY  
MODEL LABEL  
FLAT HEAD SCREW  
CYLINDER SUB ASSEMBLY  
FLAT HD SCR M3-.5 X 6  
VALVE BUSHING  
FLAT HEAD SCREW  
LOCK WASHER 4MM  
HOSE SUB ASSEMBLY  
CLAMP STOMPER  
ROLL PIN  
5
6
7
RUBBER PAD ASSEMBLY  
THROTTLE VALVE  
O-RING  
P5344020  
P5344021  
PLW02M  
P5344023  
P5344024  
P5344025  
8
9
10  
11  
12  
13  
VALVE FITTING  
HOUSING CAP  
PHLP HD SCR M4-.7 X 10  
END PLATE  
P5344013  
 
 

Graco Car Seat PD247322A User Manual
Grizzly Sander G0724 User Manual
Haier Flat Panel Television P42A1 AKS User Manual
Hamilton Beach Blender 59205C User Manual
Hamilton Beach Microwave Oven 87108 User Manual
Heath Zenith Home Safety Product PF 4192 BK User Manual
Hotpoint Oven RLA81 User Manual
HP Hewlett Packard Grinder 39 1572 User Manual
HP Hewlett Packard Projector L1735A User Manual
HP Hewlett Packard TV Converter Box 8566A User Manual