Honeywell Outdoor Ceiling Fan 5839 User Manual

K0667 12/01 Rev. B  
$'(0&2ꢀꢁꢂꢃꢄꢀ  
:LUHOHVVꢀ%LGLUHFWLRQDOꢀ$OSKDꢀ.H\SDGꢀ  
USER GUIDE  
KEYPAD FEATURES  
DISPLAY  
The 5839 is a wireless keypad that allows you to perform the same functions as you can from a wired keypad, as  
well as to display the status of your security system. The 5839 should be used as an auxiliary keypad in  
addition to one or more wired keypads. It should not be used as the only or primary keypad.  
KEYPAD KEYS  
To access the keypad keys, simply open the swing-down door by applying outward pressure on the door release  
slot on the right side. See Figure 1. The 12 keypad keys are located behind the protective door and are  
continuously backlit for ease of use. See Figure 2. (Check the User’s Guide that accompanies the control panel for  
detailed instructions on the use of these keys.)  
The function keys include keys for panic alarm activation. The panic alarms are activated by pressing key pairs  
[1] & [], [3] & [#], or [] & [#], or a Special Function Key (see below). Whether these panic keys are functional  
and the type of panic alarms they produce, is determined by the control panel’s capability and programming.  
(Check with your installer for the availability and assignment of these panic keys.)  
SOUNDER  
The keypad’s built-in sounder pulses for fire alarms and sounds continuously for burglary and audible panic  
alarms.  
SPECIAL FUNCTION KEYS  
These are four larger keys located to the left of the numeric keys (see Figure 2). The keys may be programmed  
by your installer for panic alarms or other special functions such as single-button arming.  
Special Function keys must be held down for at least 2 seconds to activate an alarm. (Check with your  
installer for the programmed function of these keys.)  
DISARMED  
READY TO ARM  
DOOR  
RELEASE  
SLOT  
1
OFF  
4
2
AWAY  
5
3
STAY  
6
MAX  
TEST  
BYPASS  
7
8
CODE  
0
9
FIRST PRESS ANY KEY TO PLACE  
KEYPAD INTO ACTIVE STATE.  
INSTANT  
CHIME  
#
*
READY  
PANIC  
THEN PRESS  
TO OBTAIN STATUS.  
KEY  
SPECIAL  
FUNCTION KEYS  
*
Figure 1: 5839 Keypad w/ Protective Door Closed  
Figure 2: 5839 Keypad w/ Protective Door Removed  
GENERAL OPERATION  
To make sure the latest system status is displayed, press the [] key before and after entering each command.  
HOW TO GET SYSTEM STATUS  
Inactive Mode:  
If the 5839 keypad is inactive (with a blank display), press any key (to activate), then press the [] key to  
display present system status.  
Active Mode:  
In the active mode (connected to a hardwired 9V power pack), the display continuously displays the present  
security system status. When the keypad is active and there is a change in system status (such as going from an  
ARMED STAY to DISARMED), it may take up to 20 seconds for the display to automatically update the status  
to show the status change. However, you can press the [] key to update the display immediately.  
 

Grace Portable Stereo System AQSTR400W User Manual
Greenheck Fan Ventilation Hood Outdoor Air Ventilator User Manual
Hamilton Beach Coffeemaker 840049600 User Manual
Hamilton Beach Toaster All Metal Toaster User Manual
Hasbro Games Evac Fighter Vehicle User Manual
Honeywell Burner Q179A User Manual
HP Hewlett Packard Switch 2520G User Manual
HTC Cell Phone ROSE130 User Manual
Hubbell Switch LXi 2700 User Manual
Hughes Modem HN9000 User Manual