Honeywell Photo Scanner IS220 User Manual

IS220  
OEM Scan Engine  
User’s Guide  
 
Table of Contents  
Introduction .....................................................................................................................................................1  
Base Kit..........................................................................................................................................................1  
Optional Accessories......................................................................................................................................1  
Dimensions ....................................................................................................................................................2  
Maintenance...................................................................................................................................................2  
Scanner Components.....................................................................................................................................3  
Labels ............................................................................................................................................................4  
Indicators  
Audible Indicator ............................................................................................................................................5  
Visual Indicator...............................................................................................................................................6  
Failure Indicators............................................................................................................................................6  
Diagnostic Indicator Display ...........................................................................................................................7  
Depth of Field ..................................................................................................................................................9  
Troubleshooting Guide ................................................................................................................................. 11  
Design Specifications  
Operational...................................................................................................................................................15  
Mechanical...................................................................................................................................................15  
Electrical ......................................................................................................................................................15  
Environmental ..............................................................................................................................................16  
Upgrading the Flash ROM Firmware............................................................................................................ 17  
Default Settings  
Communication Parameters......................................................................................................................... 19  
Scanner and Cable Terminations  
Scanner Pinout Connections........................................................................................................................ 25  
Cable Connector Configurations................................................................................................................... 25  
Limited Warranty ...........................................................................................................................................27  
Laser and Product Safety  
Cautions.......................................................................................................................................................29  
Notices.........................................................................................................................................................30  
Index...............................................................................................................................................................31  
ii  
 
Customer Support  
Technical Assistance....................................................................................................................................33  
Product Service and Repair.......................................................................................................................... 34  
iii  
 
Introduction  
The IS220 is a dual optic bench scanning engine with scan lines optimized for orthogonal orientation of 1D bar  
codes. IS220 is a completely self-contained scan engine.  
Base Kit  
Part Number  
IS220-16  
Description  
IS220 OEM Engine ( RS232 )  
00-02029  
IS220 Installation and User’s Guide *  
MetroSelect® Configuration Guide *  
00-02407  
Optional Accessories  
Part Number  
Description  
Communication/Power Cable 110 Volt  
Communication/Power Cable 220 Volt  
52-52548  
52-52547  
Other items may be ordered for the specific protocol being used. To order additional items, contact the dealer,  
distributor or call the customer service department.  
1
 
Case Dimensions  
Figure 1. Case Dimensions  
Specifications subject to change without notice.  
Maintenance  
Smudges and dirt on the unit’s window can interfere with the unit’s performance. If the horizontal or vertical  
output windows require cleaning, use only a mild glass cleaner containing no ammonia. When cleaning the  
window, spray the cleaner onto a lint free, non-abrasive cleaning cloth then gently wipe the window clean.  
If the unit’s case requires cleaning, use a mild cleaning agent that does not contain strong oxidizing chemicals.  
Strong cleaning agents may discolor or damage the unit’s exterior.  
2
 
Scanner Components  
Figure 2. Scanner Components  
No.  
Description  
Hardened Glass Window (Laser Aperture)  
Black Metal Housing  
15-pin, Male D-Sub Connector for Communication/Power Cable Connection  
Two, PEM B-M5-2 Mounting Holes Provided  
Red and Green LED  
Diagnostic Indicator Display (Two-Digit Error Code Display)  
3
 
Labels  
Figure 3. Label Locations and Examples  
4
 
Indicators  
Audible Indicators  
When the IS220 is in operation, it provides audible feedback. These sounds indicate the status of the scan  
engine.  
One Beep  
The scan engine will beep once when it first receives power, the red LED will flash and the scanner will  
beep once. The red LED will remain on for the duration of the beep. The scan engine is ready to scan.  
When the scanner successfully reads a bar code, the red LED will flash and the scanner beeps once (if  
configured to do so). If the LED does not flash, then the bar code has not been successfully read.  
Razzberry Tone  
This is a failure indicator. Refer to Failure Indicators on the next page.  
Two Beeps - On Power Up  
When a Flash ROM upgrade is needed, the scanner will beep twice followed by alternating flashes of the  
red and green LEDs.  
Three Beeps - During Operation  
When the scan engine enters configuration mode, the red LED will flash and the unit will simultaneously  
beep three times. The green and red LEDs will continue to flash while in configuration mode. Upon exiting  
configuration mode the scanner will beep three times and the LEDs will stop flashing.  
When configured, three beeps can also indicate a communications timeout during normal scanning mode.  
When using one-code programming, the scanner will beep three times (in the current selected tone),  
followed by a short pause then by a high tone and a low tone. This indicates the single configuration bar  
code has successfully configured the scan engine.  
Three Beeps - On Power Up  
This is a failure indicator. Refer to Failure Indicators on the next page.  
5
 
Visual Indicators  
Steady Green  
When the laser is active the green LED is illuminated. The green  
LED will remain illuminated until the laser is deactivated.  
During the power save mode, the laser will turn on and turn off.  
During this period, the green LED will remain illuminated.  
Steady Green and a Single Red Flash  
When the scanner successfully reads a bar code, the red LED  
will flash and the scanner will beep once. If the red LED does not  
flash or the scanner does not beep once, then the bar code has  
not been successfully read (default mode).  
Steady Green and Steady Red  
After a successful scan the scanner transmits the data to the host  
device. Some communication modes require that the host inform  
the scanner when data is ready to be received. If the host is not  
ready to accept the information, the scanner’s red LED will  
remain on until the data can be transmitted.  
Steady Green and Flashing Red  
Figure 4. Green and Red LEDs  
This indicates that the scan engine is in configuration mode.  
Steady Red, Green Off  
This indicates that the laser is off and the scan engine is waiting  
for communication from the host.  
Failure Indicators  
Flashing Green and One Razzberry Tone  
This indicates that the scanner has experienced a laser subsystem failure. The scanner will try up to 3  
times to correct the failure condition. If the laser subsystem continues to fail, that subsystem (left or right)  
will be shut down and an error indication will be shown on the Diagnostic Indicator Display. This error  
stays on the display until corrected. If the remaining subsystem is still operational, scanning will continue  
using the operational components.  
Flashing Green and Red and Two Razzberry Tones  
This indicates that the scanner has experienced a motor subsystem failure. The scanner will try up to 3  
times to correct the failure condition. If the motor subsystem continues to fail, that subsystem (left or right)  
will be shut down and an error indication will be shown on the Diagnostic Indicator Display. This error  
stays on the display until corrected. If the remaining subsystem is still operational, scanning will continue  
using the still operational components.  
Continuous Razzberry Tone with Both LEDs Off  
If, upon power up, the scanner emits a continuous razzberry tone, then the scanner has an electronic  
failure. Return the unit for repair at an authorized service center.  
Three Beeps - On Power Up  
If the scanner beeps 3 times on power up then, the nonvolatile memory that holds the scanner  
configuration has failed. Return the unit for repair at an authorized service center.  
6
 
Diagnostic Indicator Display  
There is a two-digit error code display located on the center printed circuit board (see illustration below). The  
following is a list of possible error codes and their meanings. Some errors will require immediate scanner  
maintenance.  
Error  
Code  
Description  
01  
02  
Reserved  
RAM ERROR – The scanner’s Random Access Memory  
(RAM) is tested as faulty. Return the unit for repair at an  
authorized service center.  
PROGRAM ERROR – The scanner’s software program is  
failing. Return the unit for repair.  
03  
CONFIGURATION ERROR – The non-volatile  
configuration memory did not agree with the data last  
saved. Default configuration data is then used and the  
scanner continues operating. This error is also  
accompanied by 3 beeps. This error will remain during  
operation as a reminder that this power cycle is scanning  
against a default-generated configuration.  
05  
COMMUNICATION ERROR - The RS232 data line is being  
held active. This causes the scanner to read a “break”  
signal constantly and continuous attempts are made to  
enter MetroSet configuration mode. A short on the RX  
Data line can cause this condition. It can also be the result  
of a laptop in power save mode. The scanner will abort  
attempts to enter configuration mode after a short timeout.  
The scanner can automatically recover from this condition  
once the short in the RX Data line is corrected.  
06  
LASER #1 (left) ERROR – The laser in the left scanning  
subsystem denotes a failure. The scanner will try three  
times to correct the laser operation. If the laser error  
persists, the left scanning subsystem will be shut down and  
error code 21 will remain on the diagnostic indicator  
display. If the right scanning subsystem is still healthy, it  
will remain active and scanning until the unit can be  
scheduled for repair at an authorized service center.  
Figure 5. Diagnostic Indicator Display  
21  
22  
LASER #2 (right) ERROR – The laser in the right scanning subsystem denotes a failure. The  
scanner will try three times to correct the laser operation. If the laser error persists, the right  
scanning subsystem will be shut down and error code 22 will remain on the diagnostic indicator  
display. If the left scanning subsystem is still healthy, it will remain active and scanning until the unit  
can be scheduled for repair at an authorized service center.  
7
 
MOTOR #1 (left) ERROR – The motor in the left scanning subsystem denotes a failure. The  
scanner will try three times to correct the motor operation. If the motor error persists, the left  
scanning subsystem will be shut down and error code 31 will remain on the diagnostic indicator  
display. If the right scanning subsystem is still healthy, it will remain active and scanning until the  
unit can be scheduled for repair at an authorized service center.  
31  
32  
MOTOR #2 (right) ERROR – The motor in the right scanning subsystem denotes a failure. The  
scanner will try three times to correct the motor operation. If the motor error persists, the right  
scanning subsystem will be shut down and error code 32 will remain on the diagnostic indicator  
display. If the left scanning subsystem is still healthy, it will remain active and scanning until the unit  
can be scheduled for repair at an authorized service center.  
8
 
Depth of Field  
Figure 6. Depth of Field  
Specifications subject to change without notice.  
9
 
10  
 
Troubleshooting Guide  
The following guide is for reference purposes only. Contact a customer service representative to preserve the  
limited warranty terms.  
POSSIBLE  
CAUSE(S)  
SYMPTOMS  
No LEDs,  
No beep or  
No motor spin.  
SOLUTION  
No power is being  
supplied to the  
scanner.  
Check the transformer, outlet and power strip.  
Make sure the cable is plugged into the scanner.  
No power is being  
supplied to the  
scanner from host.  
No LEDs,  
No beep.  
Some host systems cannot supply enough current to power an  
IS220. Use the power supply included with the scanner.  
The unit beeps  
3 times on power  
up.  
There has been a  
Non-volatile RAM  
failure.  
Contact a service representative if the unit will not hold the  
programmed configuration.  
The unit razzes  
continuously on  
power up.  
There has been a  
diagnostic failure.  
Contact a service representative if the unit will not function.  
Contact a service representative.  
At power up, there  
is a Razz tone and There has been a  
the green LED  
flashes.  
VLD failure.  
At power up, there There has been a  
is a Razz tone and scanner motor  
Contact a service representative.  
both LEDs flash.  
failure.  
There are multiple  
scans upon  
presentation of a  
bar code.  
The same symbol  
timeout is set too  
short.  
Adjust the same symbol timeout for a longer time.  
Enable the beeper.  
The unit powers  
up, but does not  
beep.  
The beeper is  
disabled.  
11  
 
POSSIBLE  
CAUSE(S)  
SYMPTOMS  
SOLUTION  
The unit is scanning  
a particular  
UPC/EAN is enabled by default.  
symbology that is not Verify that the type of bar code being read has been enabled.  
enabled.  
The scanner has  
been configured for a  
character length lock,  
The unit powers  
up, but does not  
scan and/or beep.  
Verify that the bar code being scanned falls into the configured  
criteria.  
or a minimum length  
and the bar code  
Typical of Non-UPC/EAN codes.  
being scanned does  
The scanner defaults to a minimum of 4 character bar code.  
not satisfy the  
configured criteria.  
The scanner is  
The unit scans a  
bar code, but  
locks up after the  
first scan (the red  
LED stays on).  
configured to support  
If the scanner is setup to support ACK/NAK, RTS/CTS,  
some form of host  
XON/XOFF or D/E, verify that the host cable and host are  
handshaking but is  
supporting the handshaking properly.  
not receiving the  
signal.  
The scanner’s data  
The unit scans,  
but the data  
transmitted to the  
host is incorrect.  
format does not  
match the host  
system  
Verify that the scanner’s data format matches the host systems  
requirements. Make sure that the scanner is connected to the  
proper host port.  
requirements.  
The print quality of  
the bar code is  
suspect.  
The unit beeps for  
some bar codes  
and NOT for  
others of the same  
bar code  
Check the print mode. The type of printer could be the  
problem. Change print settings. For example change the print  
mode to  
Check the character  
length lock.  
econo or high speed.  
The aspect ratio of  
the bar code is out of  
tolerance.  
symbology.  
12  
 
POSSIBLE  
CAUSE(S)  
SYMPTOMS  
SOLUTION  
The bar code may  
have been printed  
incorrectly.  
Check if it is a check digit/character/or border problem.  
The unit beeps for  
some bar codes  
and NOT for  
others of the same  
bar code  
The scanner is not  
configured correctly  
for the type of bar  
code.  
Check if the check digits are set properly.  
symbology.  
The minimum symbol  
length setting does  
not work with the bar  
code.  
Check if the correct minimum symbol length is set.  
The unit is not  
transmitting each  
character.  
Increase the interscan code delay setting. Adjust if the F0  
break is transmitted. It may be necessary to try this in both  
settings.  
The configuration is  
not set correctly.  
Alpha characters  
show as lower  
case.  
The computer is in  
Caps Lock mode.  
Enable the Caps Lock detect setting of the scanner to detect  
whether the PC is operating in Caps Lock.  
Com port at the host  
is not working or  
configured properly.  
Power-up OK and  
scans OK but  
does not  
Check to make sure that the baud rate and parity of the  
scanner and the communication port match and the program is  
looking for “RS-232" data.  
Com port not  
operating properly.  
communicate  
properly to the  
host.  
Cable is not  
connected to the  
proper com port.  
The host is receiving The scanner and  
data but the data  
does not look  
correct.  
host may not be  
configured for the  
same interface font.  
Check that the scanner and the host are configured for the  
same interface font.  
Intercharacter delay  
Characters are  
being dropped.  
needs to be added to Add some intercharacter delay to the transmitted output by  
the transmitted  
output.  
using the MetroSelect Configuration Guide (MLPN 00-02407).  
13  
 
14  
 
Design Specifications  
Operational  
Light Source: Two, Visible Laser Diodes @ 650 nm  
Laser Power: 1 mW per VLD  
Scan Pattern: 10 fields of 4 parallel lines (for ladder and picket fence)  
Number of Scan Lines: 40  
Scan Speed: 4000 scan lines per second +/- 5%  
Depth of Scan Field, Near: 115 mm (4.5") from window surface, pattern offset  
Depth of Scan Field, Far: 190 mm (7.5") from window surface, pattern offset  
Minimum Bar Width: 0.2 mm (8.0 mil)  
Decode Capability: Autodiscriminates all standard 1-D barcodes.  
System Interface: RS232  
Print Contrast: 35% minimum reflectance difference  
Up to 80 data characters.  
Number of Characters Read:  
The maximum number will vary based on symbology and density.  
Audible Indicators: Internal beeper  
Green LED = Laser on, ready to scan  
Red LED = Good read, decoding  
Visual Indicators (Default  
Settings):  
Mechanical  
Length: 295 mm  
Width: 150 mm  
Depth: 75 mm  
Weight: 2.5 Kg maximum excluding cable  
Termination: 15-pin, Male D-sub connector with screw locks  
Mounting: Two, M5 tapped holes are provided for mounting purposes  
Electrical  
Input Voltage: 5VDC ± 0.25V  
Operating Power: 6.25W typical @ 5VDC  
Operating Current: 1.25A typical  
DC Transformers: Class II; 5VDC @1.5A  
Laser Class 2: IEC 60825-1:1993+A1:1997+A2:2001  
EMC: FCC, ICES-003 & EN 55022 Class B  
15  
 
Environmental  
Operating = 0°C to 40°C (32°F to 104°F)  
Storage = -40°C to 60°C (-40°F to 140°F)  
Temperature:  
Humidity: 5% to 95% relative humidity , non-condensing  
Contaminants: Sealed to resist airborne particulate contaminants  
Ventilation: None required  
Specifications subject to change without notice.  
16  
 
Upgrading the Flash ROM Firmware  
The IS220 is part of Honeywell’s line of scanners with flash upgradeable firmware. The upgrade process  
requires, a new firmware file supplied to the customer by a customer service representative and MetroSet2  
software. A personal computer running Windows 95 or greater with an available RS232 serial or USB port is  
required to complete the upgrade.  
To upgrade the firmware in the IS220:  
1. Plug the scanner into a serial communication port on the host system.  
2. Start the MetroSet2 software.  
3. Click on the plus sign (+) next to Industrial Scanners to expand the supported scanner list.  
4. Choose the IS220 from the list.  
5. Click on the Configure IS220 Scanner button.  
6. Choose Utility, Flash Main Processor from the options list located on the left side of the screen.  
7. Click on the Open File button in the Flash Utility window.  
8. Locate and open the flash upgrade file.  
9. Select the COM port that the scanner is connected to on the host system.  
10. Verify the settings listed in the Flash Utility window.  
11. Click on the Flash Scanner button to begin the flash upgrade.  
12. A message will appear on the screen when the upgrade is complete.  
17  
 
18  
 
Default Settings  
Communication Parameters  
Many functions of the scanner can be "configured" - that is, enabled or disabled. The scanner is shipped from  
the factory configured to a set of default conditions. The default parameter of the scanner has an asterisk ( * )  
in the charts on the following pages. If an asterisk is not in the default column then the default setting is Off or  
Disabled. Every interface does not support every parameter. If the interface supports a parameter listed in the  
charts on the following pages, a check mark will appear.  
Parameter  
Default  
RS232  
UPC/EAN  
*
Code 128  
Code 93  
Codabar  
Interleaved 2 of 5 (ITF)  
MOD 10 Check on ITF  
Code 11  
Code 39  
Full ASCII Code 39  
MOD 43 CD on Code 39  
Transmit Mode 43 CD  
Paraff  
Paraff Lead “A”  
Allow Paraff Failures  
French PC Terminal  
MSI-Plessey  
Airline (15 digit) 2 of 5  
Airline (13 digit) 2 of 5  
Matrix 2 of 5  
Telepen  
UK Plessey  
STD 2 of 5  
MSI-Plessey 10/10 Check Digit  
MSI-Plessey MOD 10 Check Digit  
ITF Symbol Lengths  
ITF Minimum Symbol Length  
Symbol Length Lock  
Minimum Symbol Length  
Trioptic  
Variable  
6
None  
4
GS1 DataBar Enable  
19  
 
Parameter  
Default  
RS232  
GS1 DataBar ID “]e0”  
*
*
*
GS1 DataBar App ID “01”  
GS1 DataBar Check Digit  
GS1 DataBar Expanded Enable  
Expanded ID “]e0”  
*
GS1 DataBar Limited Enable  
GS1 DataBar Limited ID “]e0”  
GS1 DataBar Limited App ID “01”  
GS1 DataBar Limited Check Digit  
Beeper Tone  
*
*
*
Normal  
Before  
Transmit  
Beep Transmit Sequence  
Beeper Volume  
Loudest  
None  
Communication Timeout  
Razzberry Tone on Timeout  
Three Beeps on Timeout  
No Beeps on Timeout  
*
Fast Beep  
Beep Twice on Supplements  
No Beeps on Timeout  
*
5 Retries Before Timeout  
Timeout In …  
2 secs.  
Laser Off Between Records  
Variable Laser Off Delay  
Flash LED on Good Scan  
Reverse LED Convention  
Flash LED on Good Scan  
Enter Power Save Mode  
Blink Power Save Mode  
Laser OFF Power Save Mode  
Laser & Motor OFF Power Save Mode  
Dual Action Power Save Mode #1  
Dual Action Power Save Mode #2  
5 - 635 msec  
*
*
10 mins.  
*
Same Symbol Rescan Timeout: 500 msecs Programmable in 50 msec steps  
(MAX 6.35 seconds)  
*
Intercharacter Delay Programmable in 1 msec steps (MAX 255 msecs)  
Number of Scan Buffers  
1 msecs  
1
UPC GTIN-14 Format  
EAN-8 Enable  
*
*
Transmit EAN-8 Check Digit  
20  
 
Parameter  
Default  
RS232  
Convert EAN-8 to EAN-13  
EAN-13 Enable  
*
*
*
Transmit EAN-13 Check Digit  
UPC-A Enable  
Convert UPC-A to EAN-13  
Transmit UPC-A Check Digit  
Transmit UPC-A Number System  
Transmit UPC-A Manufacturers ID.  
Transmit UPC-A Item ID  
UPC-E Enable  
*
*
*
*
*
Empand UPC-E  
Transmit UPC-E Lead ‘0’  
Transmit UPC-E Check Digit  
Disable UPC-E Auto Redundancy  
Transmit Codabar Start/Stop Characters  
Codabar CLSI  
*
*
Dual Field Codabar  
Tab Between Dual field Codabar  
Codabar CLSI Check Digit  
Codabar 7-Check Check Digit  
Codabar Mod-16 Check Digit  
Transmit MSI Plessey Check Digits  
Number of MSI Plessey Check Digits  
UK Plessey A to X Convert  
UK Plessey Special 12 Character Format  
Transmit UK Plessey Check Digit  
EAN 128 Enable  
0
Enable French Pharma  
Enable Matrix 2 of 5 Check Digit  
Enable Hong Kong 2 of 5  
Enable Alpha Telepen  
Telepen Convert Lead ‘^L’ to ‘E’  
Enable Code 11 Check Digit  
Parity  
Space  
19200  
Baud Rate  
8 Data Bits  
7 Data Bits  
*
Stop Bits  
2
RTS / CTS Enabled  
21  
 
Parameter  
Default  
RS232  
Message RTS  
Character RTS  
*
ACK / NAK  
O / N Handshaking  
Host Bell / Cancel  
Xon / Xoff  
No Transmit Without DTR Present  
French PC Terminal Emulation  
“D/E” Disable Command  
“Z/R” Disable Command  
“F/L” Laser Command  
“M/O” Motor Enable Commands  
Beep on Bell  
*
Razz on ‘z’  
Activate on DTR  
Activate on DC2 Character  
Xmit No Read Message on DC2 Timeout  
No Transmit LED During No Read Message  
Programmable “No Read” Message  
Recv “I” = Transmit “METROLOGIC”  
Recv “i” = Transmit Scanner ID Byte  
STX Prefix  
TAB Prefix  
Metrologic Prefix  
UPC Prefix  
ETX Suffix  
TAB Suffix  
Carriage Return Suffix  
Line Feed Suffix  
*
*
UPC Suffix  
Transmit LRC  
Start LRC on 1st Byte  
Start LRC on 2nd Byte  
‘c’ Prefix for UPC  
‘$’ Prefix for UPC  
Programmable Prefix Characters  
Programmable Suffix Characters  
10 avail  
10 avail  
Multiple  
Selections  
Predefined Code ID Sets  
22  
 
Parameter  
Default  
RS232  
Programmable Prefix for Code Types  
Programmable Suffix for Code Types  
Programmable Code Lengths  
Code Selects  
7 avail  
7 avail  
5 sec  
Code Select Timeout 0.1 to 25.5 seconds  
Replace 1 Character in Transmission  
Razz on Code Select Timeout  
Japan Dual Field Code Selects  
EAN-13 Only in Japan Dual Field  
Two Digit Supplements  
*
Five Digit Supplements  
Require Supplements  
Remote Supplement Support  
Two Digit Redundancy  
Five Digit Redundancy  
Enable Coupon Code 128  
Transmit Coupon ‘]C1’  
*
*
Group Separator  
Coupon Code Can Begin with ’4’  
Enable EAN-99 Coupon Code  
Bookland  
Convert Bookland to ISBN  
Reformat ISBN  
Transmit ISBN Check Digit  
Bookland 977 2-Digit Supp Required  
378 / 379 Supplements  
414 / 419 Supplements  
434 / 439 Supplements  
Number System 2 Enables Supplements  
Number System 5 Enables Supplements  
100 msec to Find Supplement (100 - 800 msec)  
Allow Code ID’s with Supplements  
*
23  
 
24  
 
Scanner and Cable Terminations  
Scanner Pinout Connections  
Standard 15-pin, Male D-Sub  
Pin  
1
2
Function  
Shield GND  
TXD  
3
RXD  
4
DTR  
5
GND  
6
DSR  
7
CTS  
8
RTS  
9
External LED  
+5V  
+5V  
GND  
GND  
Earth Ground  
External Beeper  
10  
11  
12  
13  
14  
15  
Cable Connector Configurations  
52-52548 and 52-52547 Communication/Power Cable  
Standard 15-pin, Female D-  
Sub  
Standard 9-pin, Female D-Sub  
Pin  
1
Function  
Shield GND  
Pin  
1
Function  
N/C  
2
3
4
5
6
7
8
9
TXD  
RXD  
DTR  
GND  
DSR  
CTS  
RTS  
N/C  
2
3
4
5
6
7
8
9
TXD  
RXD  
DTR  
GND  
DSR  
CTS  
RTS  
N/C  
10  
11  
12  
13  
14  
15  
+5V  
+5V  
GND  
GND  
Lug  
N/C  
25  
 
26  
 
Limited Warranty  
Honeywell International Inc. ("HII") warrants its products and optional accessories to be free from defects in  
materials and workmanship and to conform to HII’s published specifications applicable to the products  
purchased at the time of shipment. This warranty does not cover any HII product which is (i) improperly  
installed or used; (ii) damaged by accident or negligence, including failure to follow the proper maintenance,  
service, and cleaning schedule; or (iii) damaged as a result of (A) modification or alteration by the purchaser or  
other party, (B) excessive voltage or current supplied to or drawn from the interface connections, (C) static  
electricity or electro-static discharge, (D) operation under conditions beyond the specified operating  
parameters, or (E) repair or service of the product by anyone other than HII or its authorized representatives.  
This warranty shall extend from the time of shipment for the duration published by HII for the product at the  
time of purchase ("Warranty Period"). Any defective product must be returned (at purchaser’s expense) during  
the Warranty Period to HII factory or authorized service center for inspection. No product will be accepted by  
HII without a Return Materials Authorization, which may be obtained by contacting HII. In the event that the  
product is returned to HII or its authorized service center within the Warranty Period and HII determines to its  
satisfaction that the product is defective due to defects in materials or workmanship, HII, at its sole option, will  
either repair or replace the product without charge, except for return shipping to HII.  
EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE LAW, THE FOREGOING WARRANTY IS  
IN LIEU OF ALL OTHER COVENANTS OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, ORAL OR  
WRITTEN, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.  
HII’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY IS LIMITED  
TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW OR REFURBISHED  
PARTS. IN NO EVENT SHALL HII BE LIABLE FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF HII ARISING IN CONNECTION WITH ANY  
PRODUCT SOLD HEREUNDER (WHETHER SUCH LIABILITY ARISES FROM A CLAIM BASED ON  
CONTRACT, WARRANTY, TORT, OR OTHERWISE) EXCEED THE ACTUAL AMOUNT PAID TO HII FOR  
THE PRODUCT. THESE LIMITATIONS ON LIABILITY SHALL REMAIN IN FULL FORCE AND EFFECT  
EVEN WHEN HII MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH INJURIES, LOSSES, OR  
DAMAGES. SOME STATES, PROVINCES, OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR  
LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR  
EXCLUSION MAY NOT APPLY TO YOU.  
All provisions of this Limited Warranty are separate and severable, which means that if any provision is held  
invalid and unenforceable, such determination shall not affect the validity of enforceability of the other  
provisions hereof. Use of any peripherals not provided by the manufacturer may result in damage not covered  
by this warranty. This includes but is not limited to: cables, power supplies, cradles, and docking stations. HII  
extends these warranties only to the first end-users of the products. These warranties are non-transferable.  
The duration of the limited warranty for the IS220 is two (2) year(s). The accessories have a 90 day limited  
warranty from the date of manufacture.  
27  
 
28  
 
Laser and Product Safety  
Cautions  
Caution  
Use of controls or adjustments or performance of procedures other than those specified herein may result  
in hazardous laser light exposure. Under no circumstances should the customer attempt to service the  
laser scanner. Never attempt to look at the laser beam, even if the scanner appears to be nonfunctional.  
Never open the scanner in an attempt to look into the device. Doing so could result in hazardous laser light  
exposure. The use of optical instruments with the laser equipment will increase eye hazard.  
Atención  
La modificación de los procedimientos, o la utilización de controles o ajustes distintos de los especificados  
aquí, pueden provocar una luz de láser peligrosa. Bajo ninguna circunstancia el usuario deberá realizar el  
mantenimiento del láser del escáner. Ni intentar mirar al haz del láser incluso cuando este no esté  
operativo. Tampoco deberá abrir el escáner para examinar el aparato. El hacerlo puede conllevar una  
exposición peligrosa a la luz de láser. El uso de instrumentos ópticos con el equipo láser puede  
incrementar el riesgo para la vista.  
Attention  
L'emploi de commandes, réglages ou procédés autres que ceux décrits ici peut entraîner de graves  
irradiations. Le client ne doit en aucun cas essayer d'entretenir lui-même le scanner ou le laser. Ne  
regardez jamais directement le rayon laser, même si vous croyez que le scanner est inactif. N'ouvrez  
jamais le scanner pour regarder dans l'appareil. Ce faisant, vous vous exposez à une rayonnement laser  
qú êst hazardous. L'emploi d'appareils optiques avec cet équipement laser augmente le risque  
d'endommagement de la vision.  
Achtung  
Die Verwendung anderer als der hier beschriebenen Steuerungen, Einstellungen oder Verfahren kann eine  
gefährliche Laserstrahlung hervorrufen. Der Kunde sollte unter keinen Umständen versuchen, den Laser-  
Scanner selbst zu warten. Sehen Sie niemals in den Laserstrahl, selbst wenn Sie glauben, daß der  
Scanner nicht aktiv ist. Öffnen Sie niemals den Scanner, um in das Gerät hineinzusehen. Wenn Sie dies  
tun, können Sie sich einer gefährlichen Laserstrahlung aussetzen. Der Einsatz optischer Geräte mit dieser  
Laserausrüstung erhöht das Risiko einer Sehschädigung.  
Attenzione  
L’utilizzo di sistemi di controllo, di regolazioni o di procedimenti diversi da quelli descritti nel presente  
Manuale può provocare delle esposizioni a raggi laser rischiose. Il cliente non deve assolutamente tentare  
di riparare egli stesso lo scanner laser. Non guardate mai il raggio laser, anche se credete che lo scanner  
non sia attivo. Non aprite mai lo scanner per guardare dentro l’apparecchio. Facendolo potete esporVi ad  
una esposizione laser rischiosa. L’uso di apparecchi ottici, equipaggiati con raggi laser, aumenta il rischio  
di danni alla vista.  
Class 2 Laser Product  
Laser Klasse 2 Produkt  
Appareil A Laser De Classe 2  
29  
 
Notices  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)  
This device may not cause harmful interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by  
one or more of the following measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help  
Notice  
This Class B digital apparatus complies with Canadian ICES-003.  
Avertissement  
Cet appareil numérique de la class B est conforme à la norme NMB-003.  
30  
 
Index  
Ground................................................................25  
A
H
Accessories...........................................................1  
Application.............................................................7  
Audible Indicators..........................................11–13  
Host .............................................................. 19–23  
I
B
Indicators  
Beeper.......................................................5, 19–23  
Audible....................................... 5, 11–13, 19–23  
Error Codes....................................................3, 7  
Failure............................................................3, 5  
Visual ......................................3, 5, 11–13, 19–23  
C
Cable  
Communication.........................................1, 3, 25  
Configuration ....................................................25  
Pinouts .............................................................25  
Power .......................................................1, 3, 25  
Troubleshooting..........................................11–13  
Case  
Components.......................................................3  
Dimensions.........................................................2  
Caution............................................................4, 29  
CE.......................................................................29  
Communication  
L
Label  
Caution...............................................................4  
Location .............................................................4  
Serial Number ....................................................4  
Laser Aperture ................................................ 3, 10  
Laser Class.........................................................15  
Laser Light .................................................. 4, 7, 29  
M
Maintenance ................................................... 7, 10  
Meteor.................................................................17  
MetroSet2 ...........................................................17  
Mounting Holes .................................................2, 3  
Default Settings ..........................................19–23  
Troubleshooting..........................................11–13  
compliance ..........................................................27  
Configuration.............................................7, 11–13  
Guide............................................................1, 13  
customer service .................................................27  
Customer Service..................................................1  
N
Notices................................................................29  
P
D
Parameters ................................................... 19–23  
PC................................................................. 19, 22  
Product  
Default Settings.............................................19–23  
Depth of Field  
Far....................................................................10  
Near .................................................................10  
Diagnostic Indicator Display ..............................3, 7  
Safety...............................................................29  
R
E
Red LED ...........................................................3, 5  
repair...................................................................27  
Repair ...................................................................7  
RMA....................................................................27  
RS232........................................................... 19–23  
EMC ....................................................................15  
Error Codes.......................................................3, 7  
F
Failure Modes........................................................5  
FCC.....................................................................29  
Flash ROM Firmware ..........................................17  
S
Scanner  
Pinouts.............................................................25  
service.................................................................27  
G
Green LED ........................................................3, 5  
31  
 
Specifications  
V
Electrical...........................................................15  
Environmental...................................................15  
Mechanical .......................................................15  
Operational.......................................................15  
Symbol Length ..............................................11–13  
Visual Indicator  
Green LED ..............................3, 5, 11–13, 19–23  
Red LED .................................3, 5, 11–13, 19–23  
W
T
warranty ..............................................................27  
Window....................................................... 3, 7, 10  
Troubleshooting.............................................11–13  
U
Upgrade ..............................................................17  
32  
 
Customer Support  
Technical Assistance  
If you need assistance installing or troubleshooting your device, please call your distributor or the nearest  
technical support office:  
North America/Canada  
Telephone: (800) 782-4263  
Latin America  
Telephone: (803) 835-8000  
Telephone: (800) 782-4263  
Brazil  
Telephone: +55 (21) 3535-9100  
Fax: +55 (21) 3535-9105  
Mexico  
Telephone: 01-800-HONEYWELL (01-800-466-3993)  
Europe, Middle East, and Africa  
Telephone: +31 (0) 40 7999 393  
Fax: +31 (0) 40 2425 672  
Hong Kong  
Telephone: +852-29536436  
Fax: +851-2511-3557  
Singapore  
Telephone: +65-6842-7155  
Fax: +65-6842-7166  
China  
Telephone: +86 800 828 2803  
Fax: +86-512-6762-2560  
Japan  
Telephone: +81-3-6730-7344  
Fax: +81-3-6730-7222  
Online Technical Assistance  
You can also access technical assistance online at www.honeywellaidc.com.  
33  
 
Product Service and Repair  
Honeywell International Inc. provides service for all its products through service centers throughout the world.  
To obtain warranty or non-warranty service, contact the appropriate location below to obtain a Return Material  
Authorization number (RMA #) before returning the product.  
North America  
Telephone: (800) 782-4263  
Latin America  
Telephone: (803) 835-8000  
Telephone: (800) 782-4263  
Fax: (239) 263-9689  
Brazil  
Telephone: +55 (21) 3535-9100  
Fax: +55 (21) 3535-9105  
Mexico  
Telephone: 01-800-HONEYWELL (01-800-466-3993)  
Fax: +52 (55) 5531-3672  
Europe, Middle East, and Africa  
Telephone: +31 (0) 40 2901 633  
Fax: +31 (0) 40 2901 631  
Hong Kong  
Telephone: +852-29536436  
Fax: +851-2511-3557  
Singapore  
Telephone: +65-6842-7155  
Fax: +65-6842-7166  
China  
Telephone: +86 800 828 2803  
Fax: +86-512-6762-2560  
Japan  
Telephone: +81-3-6730-7344  
Fax: +81-3-6730-7222  
Online Product Service and Repair Assistance  
You can also access product service and repair assistance online at www.honeywellaidc.com.  
34  
 
 
Honeywell Scanning & Mobility  
9680 Old Bailes Road  
Fort Mill, SC 29707  
00-02029 Rev C  
5/11  
 

Graco Swing Sets ISPS035AB User Manual
Havis Shields Automobile Accessories C TCB 24 User Manual
Heath Zenith Home Safety Product BL 1100 User Manual
Hotpoint Clothes Dryer TCD970 User Manual
Hotpoint Double Oven 6173 User Manual
HP Hewlett Packard Computer Monitor D5062 User Manual
HP Hewlett Packard Personal Computer VoodooDNA 803 User Manual
HP Hewlett Packard Scanner C5374 60004 User Manual
HTC Cell Phone MDA2 User Manual
Hunter Fan Fan 23970 User Manual